Other Products

One side coated with Aluminum foil/polyester film. Protection from intense radiant heat. Reflects more than 95% of the radiant heat that contacts its surface Excellent radiant heat protection from sources such as superhot metal slabs, proximity to liquid metal, infrared heaters, open flame / plasma or engine exhaust manifolds is a concern. Constructed from a high temperature base filament/texturized fiberglass fabric which is then coated with highly reflective polished aluminum.

The aluminum foil coating melts at  660°C, however it does take some time for the aluminum foil to absorb enough heat to melt, thereby it can withstand short exposure to the higher temperatures. The basic fiberglass fabric is 550°C, while adhesive will burnoffor vaporize at temperatures above 148°C.
Aluminum foil thickness normally in 7,18, 20, 25 micron.

Aluminum Foil Laminated Aramid Fabric

Carbon Fiber has the highest compressive strength of all the reinforcing materials (composites), and it has a high strength to weight ratio and low coefficient of thermal expansion. The density of carbon fiber is also much lower than the density of steel. Carbon fiber is in the form of several thousand long, thin strands of material that is composed of mostly carbon atoms.

3K, 2 x 2 Twill Weave Carbon Fiber Fabric

194 GSM, 0.30mm Thick, 3K, 2x2 Twill Weave This twill weave is most popular carbon fiber fabric, with a signature appearance that is highly desirable for modern composite parts in the auto, marine, and sporting goods industries. As compared to plain weave counterparts, the twill weave offers greater conformability and delivers a slight edge in strength.

6K, 2 x 2 Twill Weave Carbon Fiber Fabric

370 GSM,0.43mm Thick, 6K, 2x2 Twill Weave
This twill weave fabric features a tight weave and a cosmetically perfect 2x2 twill pattern. As a mid-weight carbon, it is a bit stiffer than 3K, meaning it is best used on flatter surfaces requiring less drapability. It retains the signature appearance that is highly desirable for modern composite parts in the auto, marine, and sporting goods industries. This fabric is frequently used for structural applications, offering improved economics to fabricators when compared to multiple layers of lighter fabrics.

12K, 2 x 2 Twill Weave Carbon Fiber Fabric

670 GSM,0.76mm Thick, 12K, 2x2 Twill Weave
This twill weave will add bulk to your laminate quickly. Due to its heavier weight and thickness, this fabric is slightly more difficult to form than lighter-weight carbon. While it's not generally used for small, complex shapes, it is excellent for flat parts and high strength requirements. Twill weaves offer the signature appearance that is highly desirable for modern composite parts with great conformability and strength. This fabric is frequently used for structural applications, offering improved economics to fabricators when compared to multiple layers of lighter fabrics.

3K, Plain Weave Carbon Fiber Fabric

194gm GSM, 0.30 Thick, 12.5 x 12.5 Plain Weave
For lightweight aerodynamic parts, this plain weave carbon fiber is a commonly selected fabric style, delivering uniform strength in both horizontal and vertical directions.

1K, Plain Weave Ultralight Carbon Fiber Fabric

118GSM,0.22mm Thick, 1K Plain Weave
This unique carbon fabric is used in the most demanding applications which call for maximum strength and stiffness, and where minimum weight justifies the added cost. The plain weave construction delivers uniform strength in both horizontal and vertical directions, and provides for excellent stability and easy handling. This ultralight fabric is suitable for aerospace, UAVs, competition auto and marine, and light industrial applications.

6K, 5HS Weave Carbon Fiber Fabric

370GSM,0.60Thick, 6K, 5HS Weave Construction
With twice the fiber density of 3K fabric selections, the 5-Harness Satin Weave builds quickly to form lightweight structural applications that feature virtually no flex. Its unique satin weave features carbon fibers bundled and woven repeatedly to float over four bundles, then under one. As a result, the fabric is flatter and more easily draped over the most complex shapes, especially compared to plain or satin weaves. Because of its unique satin weave, one side of the fabric will look different than the other. Fabricators will usually invert half the plies when looking to produce a symmetrical laminate.

Unidirectional Carbon Fabric (305gm)

305GSM, 0.35 Thick, 12K Standard Modulus
This unidirectional fabric is non-woven. Consequently, there is no crimping of the fibers and only minimal binder is used. Polyester fill threads on one side further reduce crimp potential. This results in the highest property unidirectional dry reinforcement available. Unidirectional fabrics add strength in only one direction. To maximize the strength of this carbon fiber, use an epoxy resin system.

Wasp - 3K, 12x18 Carbon Fiber Fabric

248GSM,0.40 Thick, 3K, 12x18
This hexagon pattern almost slithers across the fabric surface like a reptile, lending itself to a variety of interesting applications, like car hoods, water sports equipment, or even furniture. Patterned styles, like this interlocking honeycomb, not only create a unique look, but help to maximize the inherent strength properties of the carbon fibers from which they're made. Its pattern will not affect the ultimate tensile strength or stiffness. This fabric must be used with a resin. To maximize strength properties, use an epoxy.

12K, 10x10 Carbon Fiber Fabric

650GSM,0.76 Thick, 12K, 10x10
This brawny, 12K carbon fiber is a bold, hardworking version of traditional plain weave, with every thick yarn of fabric like a glossy brush stroke. Its high-contrast surface features both brilliant highlights and contrasting deep, dark shadows. Choose Grandmaster for projects that require a robust appearance, perfect for the hood of a car, a motorcycle fender, or snowboard. The 12-K, plain weave of the Grandmaster will keep it from being as conformable to complex shapes as a lighter fabric. This fabric must be used with a resin. To maximize strength properties, use an epoxy.

STF Ceramic Fabric is made from alumina-silica ceramic fiber, free of asbestos. These fiber materials can be used in different industrial applications under temperatures up to 1282°C and have excellent chemical stability and strong resistance to thermal shock and corrosion attack. Inconel wire / SS wire and fiberglass filament are incorporated into the yarn to increase tensile strength of the fabrics both before and after exposure to heat.

Specifications:

Max Operating Temperature

1260ºC With Glass fiber reinforced

Max Operating Temperature

1450ºC With Stainless Steel reinforced

Melting Temperature

1800°C

Thickness in mm

1.5, 2 , 3

Typical Applications:

  • Welding blankets
  • safety blankets
  • curtains
  • expansion joints
  • protective
  • Insulation covers or shields.

Loom state Glass Fabric contains spinners binders applied during yarn production to protect yarn from hazards during weaving operation. This binder is not suitable for many applications. Therefore, whenever needed, binders are removed under carefully controlled time & temperature conditions and then treated with appropriate coupling agent called Silane to bond glass with different resin systems.

Bonding mechanism as understood is explained as follows

The STF Desized and silane treated fiberglass fabrics are compatable to polyester, epoxy and phenolic resin systems and have uniform wetting property.

Style Standard widths(mm) Total thickness(mm) Weight (g/m2) Breaking Strength in kg(1” x 4”) Weave
Warp Weft
4 mil 1000 0.09 105 25 22 Plain
7 mil 1000 0.17 200 40 32 Plain
10 mil 1000 0.24 282 60 55 Satin
13 mil 1000 0.36 430 90 65 Satin
28 mil 1000 0.70 840 140 100 Satin

STF fiberglass cloth is a woven fabric manufactured from texturized fiberglass yarn / Glass filament yarn. STF fiberglass cloth is an ideal material for various thermal and acoustic insulation, high temperature seal and protection.

Style Standard widths (mm) Total thickness (mm) Weight (g/m2) Breaking Strength in kg (1” x 4”)  Weave
Warp Weft
FRP 1000 0.14 70 35 35 Plain
7 mil 1000 0.17 200 120 85 Plain
13 mil 1000 0.36 430 220 170 Satin
28 mil 1000 0.70 840 350 250 Satin
55 mil 1000 1.35 1000 130 70 Plain

Characteristics and Specs

  • Heat, spark and flame resistant, temperature rating 550°C
  • Chemical resistant
  • Low thermal conductivity
  • High tensile strength, no stretch or shrink
  • High dielectric strength
Typical Applications: Welding blankets, safety blankets, curtains, expansion joints, protective and insulation covers or shields.
E-glass fiberglass filter for molten aluminum filtration is designed and woven for the diffusion and filtration of molten aluminum. Molten aluminum is very easy to be oxidizated when exposed to air, so with the use of Fiberglass mesh filterfabric, the pure molten aluminum is easier to obtain during primary melting, foundry casting and scrap recycling. Main Types
  • With White resin coating (white colour)
  • With resin coating (yellow or dark brown colour)
  • Smokeless carbonzied treatment - premium type (black colour)
Style Construction Weave Weight (g/m2) Hole size In mm % Open Area
39 6 x 6.5 Leno 370 3.5 x 3.5 64
49 7 x 7 Leno 410 3 x 3 57
64 8 x 8 Leno 275 2.5 x 2.5 53
100 10 x 10 Plain 360 1.5 x 1.5 42
200 14 x 14 Plain 245 1.2 x 1.2 48
255 17 x 15 Plain 285 0.9 x 1.2 42
400 20 x 20 Plain 345 0.6 x 0.6 28

Working temperature: 700-800 ºC Soft Point: 900ºC

FEATURES

  • Brings down the casting rejection rate due to slag inclusions.
  • Cheap and cost effective,easy installation.
  • Do not change molten metal element or contaminate molten aluminum.
  • Stay away from molten aluminum and easy to handle the aluminum scrap recycling (Fiberglass mesh can float on top of the molten metal when the metal is recycled and can be scooped out), this can greatly reduce cost.
  • Reduces molten metal turbulence,improves molten metal distribution and flow.
  • Remove oxides and inclusions to improve castings mechanical properties and surface finish.
  • Excellent stiffness and toughness,good impact resistance.
  • Mesh and grid is well organized and highly integrity.
APPLICATION
  • As the first step filtration for primary smelting
  • Ingate filtration for sand casting,gravity casting or low pressure die casting
  • As the removal plane to help riser easily to be knock off from castings

STF Silica Fabrics amorphous Silica Fabrics are high temperature fabrics used for a wide range of insulation and protection applications such as welding curtains, welding blankets and welding pads. STF Silica Fabricshas a minimum silicon dioxide content of 96% for optimum performance. STF Silica Fabricscan be fabricated into many forms to withstand continuous temperatures up to 980°C for various periods of time.

Specifications

Quality 84 ch 188 ch
Thickness in mm 0.70 1.35
Wt/sq. meter in gm 610 1220
Withstand Temperature 980°C 980°C
Width in inch 36” 36”

Extensively used in the following Industries:

  • Power Generation (Nuclear Approved)
  • Refinery
  • Shipbuilding & Repair
  • Metal Processing
  • PetroChemical
  • Aerospace
  • Automotive
  • AVS

STF PTFE Coated Fiberglass Sewing Thread is the industry standard for dry filtration and insulation applications. It provides high temperature stability and sintered PTFE coating gives the product excellent frictional properties.

Style Tex Size Diameter In mm   Tensile Strength In kg Standard Length (Meter)
STF 7512 134 0.38 7 1000
STF 7513 210 0.45 9 1000
STF 7514 270 0.53 11 1000

Features

  • High Temperature Resistance (550OC)
  • High Strength
  • Uniform PTFE coating
  • Glass Fiber Substrate

Benefits

  • Chemical Resistance
  • Minimal Buildup of Contaminants
  • Good Sewability
  • Excellent Thermal Shock Resistance

Applications:

  • High Temperature Textiles
  • Safety Spray Shields
  • Braided Sleeving
  • Insulation Jackets
  • Thermal Insulation Pads
  • High Temperature Gaskets
  • Kiln Seals
  • Fire Resistant Composites
  • Welding Blankets
  • Heat Shields

SUPERTECH is also the manufacturing of high performance process belts. SUPERTECH industrial conveyor belts combine the non-stick surface and heat resistance of PTFE and with the strength and dimensional stability of fiberglass. The unique behavior of these materials results in a product that is more practical and cost-effective than conventional belting materials which is ideal for the demands of many different industrial conveyor applications.Dimensionally stable from -73° to +260°C, SUPERTECH belts are non-toxic, tasteless odorless,  use in food contact processing and packaging. In addition, SUPERTECHPTFE belts offer exceptional durability and extremely low elongation. 

STANDARD SERIES

Style Standard widths (mm) Nominal thickness (mm) Weight (g/m2) PTFE content (%) Breaking Strength (kg/inch)
STF3-STD 1000 0.075 135 64 30
STF216-5STD 1000 0.125 255 58 55
STF116-5STD 1000 0.125 255 57 60
STF10-STD 1000 0.23 485 57 100
STF14-STD 1000 0.33 650 51 140
STF22-STD 1000 0.50 1030 52 180
STFDISH-STD 1000 0.62 830 40 140
STF28-STD 1000 0.66 1230 47 210

OPEN MESH FABRIC SERIES / BLACK ANTI-STATIC OPEN MESH FABRIC SERIES

Style Mesh (mm) Thickness (mm) Weight (g/m2) PTFE content (%) Breaking Strength (kg/inch) Open Area %
STF-460 64 4 X 4 0,90 460 31 130 64
STF-580 24 1 X 1 0,70 580 23 100 24
STF-430 60 2 X 2 0,80 430 23 70 60
STF-550 66 6 X 6 1,20 550 33 100 66
STF-580 54 4 X 4 1,20 580 31 130 54
STF-600 38 2 X 2 0,90 600 45 90 38

Some Properties:

  • Outstanding temperature resistance (from -170ºC to +260ºC)
  • Resistant to corrosive caustic cleaning agents
  • Resistant to corrosive agents
  • Low thermal mass
  • Controlled porosity
  • Superior non-stick surface, easy to clean
  • High dielectric strength
  • Dimensional stability
  • Resistance to UV, IR and HF
  • Non-toxic
  • Superior tracking

SUPERTECH open mesh belts are used in screen printing to transport imprinted materials through drying ovens and cooling chambers. These belts are long lasting and perform well over a wide range of operating temperatures.

SUPERTECH belt fabrication department can supply a wide variety of splices and edge reinforcements in order to respond customer’s specific applications. Different constructions of open mesh fabrics are available with Kevlar , Nomex and Fiberglas.

STF PTFE sewing thread from 100% pure Expanded PTFE fiber, making it possibly the most chemical resistant thread on the market today. In addition, it is completely unaffected by ultraviolet (UV) radiation and will not degrade from continuous exposure to the sun! It will not rot, support fungus or mildew. In addition, it is unaffected by fuel, cleaning solvents, salt water, motor oil etc… making your sewn seams as long lasting as your fabrics / filter media.

 
PTFE Sewing Thread
Style Tex Size Diameter In mm   Tensile Strength In kg
STF 1353 135 0.25 3
STF 2105 210 0.30 5

Features

  • 100% Expanded PTFE Fiber
  • Twisted Fiber Thread
  • High Strength
  • Chemical Resistance
  • Balanced Twist
  • Smooth Finished Product
  • Very Uniform and “Round”

Benefits

  • Unaffected by UV (ultraviolet) Rays
  • Excellent Chemical Resistance
  • Will Not Rot or Mildew
  • Longevity in Outdoor Applications
  • Non-Stick
  • Temperatures to 260 OC.
  • Excellent Sew ability Flexibility

Applications:

  • High Temperature Textiles
  • Outdoor Products
  • Filtration Media
  • Safety Spray Shields
  • Insulation Jackets
  • Awnings / Tents
  • Marine Applications
  • Boat Covers

Silicon Rubber Coated Fiberglass Fabrics
STF silicone coated fabrics can be used a wide range of industrial applications, such us; Shrink Tunnels; FoamManufacturing; Electrical Insulation Tapes; Conveyor Belts; Safety Curtains; Release and Seperator Sheets;Gasketing

Some Properties

  • Hi - temperature resistant (up to 230 C)
  • Excellent release properties
  • Superior abrasion resistance
  • Good chemical resistance
  • Superior dielectric properties

Style Standard widths (mm) Total thickness (mm) Weight (g/m2)

Regular Color  

  Weave
STF 0.23 SR/1 1000 0.22 280 Red/Grey/Black Plain
STF 0.26  SR/2 1000 0.26 350 Red/Grey/Black Plain
STF 0.48 SR/1 1000 0.48 620 Red/Grey/Black Satin
STF 0.58 SR/2 1000 0.58 830 Red/Grey/Black Satin
STF 0.78 SR/1 1000 0.78 1000 Red/Grey/Black Satin
STF 0.90 SR/1 1000 0.90 1200 Red/Grey/Black Satin
STF 0.60 SR/2 1000 0.60 830 Red/Grey/Black Plain
STF 0.44 SR/2 1000 0.42 600 Red/Grey/Black Plain
STF 1.35 SR/1 1000 1.35 1200 Red/Grey/Black Plain

Liquid Silicone Rubber (LSR) Fabric is available with liquid silicone rubber on both sides or with PTFE on one side and liquid silicone rubber on the other. Our LSR products include food contact and non-food contact fabrics. 

Benefits:

  • High friction/non slip
  • Chemically inert
  • Excellent release properties
  • Some grades approved for direct food contact

Address

Block No. 1401/A & 1401/B, Luna Patiya,
B/h. Elysium Pharma Mahali Talav,
Vil. Dhabasa, Tal. Padra, Dist. Vadodara,
Gujarat Pin Code: 391440. INDIA

Contact Us

Phone:
+91-2662-222036 / 222037
Email Id:
info@supertechfabrics.com

Connect with us

We're on Social Networks. Follow us & get in touch.